View 2505_136586.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
PHOTOCOUPLER
PS2505-1,-2,-4, PS2505L-1,-2,-4
HIGH ISOLATION VOLTAGE AC INPUT RESPONSE TYPE MULTI PHOTOCOUPLER SERIES
-NEPOC
TM
Series-
www..com
DESCRIPTION
The PS2505-1, -2, -4 and PS2505L-1, -2, -4 are optically coupled isolators containing GaAs light emitting diodes and an NPN silicon phototransistor. The PS2505-1, -2, -4 are in a plastic DIP (Dual In-line Package) and the PS2505L-1, -2, -4 are lead bending type (Gull-wing) for surface mount.
FEATURES
* AC input response * High isolation voltage (BV = 5 000 Vr.m.s.) * High collector to emitter voltage (VCEO = 80 V) * High-speed switching (tr = 3 s TYP., tf = 5 s TYP.) * Ordering number of taping product: PS2505L-1-E3, E4, F3, F4, PS2505L-2-E3, E4 * UL approved: File No. E72422 (S)
APPLICATIONS
* Power supply * Telephone/FAX. * FA/OA equipment * Programmable logic controller
The information in this document is subject to change without notice.
Document No. P10958EJ6V0DS00 (6th edition) Date Published April 1998 NS CP(K) Printed in Japan
The mark * shows major revised points.
(c)
1988
PS2505-1,-2,-4,PS2505L-1,-2,-4
PACKAGE DIMENSIONS (in millimeters) DIP Type
PS2505-1 (New Package)
TOP VIEW
43
PS2505-4 (New Package)
TOP VIEW
16 15 14 13 1211 10 9
4.6 0.35
12 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
20.3 MAX.
12345678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9,11,13,15. Emitter 10,12,14,16. Collector
6.5
7.62
3.8 MAX. 2.8 4.55 MIN. MAX. 2.8 4.55 MIN. MAX. 3.8 MAX.
6.5
www..com
7.62
0.65
0.65
1.250.15 2.54
0.50 0.10 0.25 M
0 to 15
1.250.15 2.54
0.50 0.10 0.25 M
0 to 15
PS2505-1
5.1 MAX.
TOP VIEW
43
PS2505-2
10.2 MAX.
TOP VIEW
8 76 5
12 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
1234 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector
6.5
7.62
3.8 MAX. 2.8 4.55 MIN. MAX. 2.8 4.55 MIN. MAX. 3.8 MAX.
6.5
7.62
0.65
0.65
1.250.15 2.54
0.50 0.10 0.25 M
0 to 15
1.250.15 2.54
0.50 0.10 0.25 M
0 to 15
PS2505-4
20.3 MAX.
TOP VIEW
16 15 14 13 12 11 10 9
7.62
2.8 4.55 MIN. MAX. 3.8 MAX.
12345678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9,11,13,15. Emitter 10,12,14,16. Collector
0.65
6.5
1.250.15 2.54
0.50 0.10 0.25 M
0 to 15
Caution New package 1-ch, 4-ch only
2
PS2505-1,-2,-4,PS2505L-1,-2,-4
Lead Bending Type
PS2505L-1 (New Package)
TOP VIEW
43
PS2505L-4 (New Package)
TOP VIEW
16 15 14 13 1211 10 9
4.6 0.35
12 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
20.3 MAX.
12345678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9,11,13,15. Emitter 10,12,14,16. Collector
6.5
6.5
0.05 to 0.2
www..com
3.8 MAX.
7.62
7.62
3.8 MAX.
1.250.15 0.25 M 2.54
0.90 0.25 9.60 0.4
1.250.15 0.25 M 2.54
0.90 0.25 9.60 0.4
PS2505L-1
TOP VIEW
43
PS2505L-2
TOP VIEW
8 76 5
5.1 MAX.
12 1. Anode, Cathode 2. Cathode, Anode 3. Emitter 4. Collector
10.2 MAX.
1234 1, 3. Anode, Cathode 2, 4. Cathode, Anode 5, 7. Emitter 6, 8. Collector
6.5
6.5
0.05 to 0.2
7.62
3.8 MAX.
7.62
3.8 MAX.
1.250.15 0.25 M 2.54
0.90 0.25 9.60 0.4
1.250.15 0.25 M 2.54
0.90 0.25 9.60 0.4
PS2505L-4
TOP VIEW
16 15 14 13 12 11 10 9
20.3 MAX.
12345678 1, 3, 5, 7. Anode, Cathode 2, 4, 6, 8. Cathode, Anode 9,11,13,15. Emitter 10,12,14,16. Collector
6.5
7.62
3.8 MAX.
1.250.15 0.25 M 2.54
0.90 0.25 9.60 0.4
Caution New package 1-ch, 4-ch only
0.05 to 0.2
0.05 to 0.2
0.05 to 0.2
3
PS2505-1,-2,-4,PS2505L-1,-2,-4
ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified)
Ratings Parameter Symbol PS2505-1, PS2505L-1 PS2505-2,-4 PS2505L-2,-4 80 1.5 150 1 80 7 50 1.5 150 5 000 -55 to +100 -55 to +150 1.2 120 1.2 120 Unit
Diode
Forward Current (DC) Power Dissipation Derating Power Dissipation Peak Forward Current
*1
IF
mA mW/C mW/ch A V V mA/ch mW/C mW/ch Vr.m.s. C C
PD/C
PD IFP VCEO VECO IC
Transistor www..com
Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation
PC/C
PC BV TA Tstg
Isolation Voltage
*2
Operating Ambient Temperature Storage Temperature
*1 PW = 100 s, Duty Cycle = 1 % *2 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output
ELECTRICAL CHARACTERISTICS (TA = 25 C)
Parameter Diode Forward Voltage Terminal Capacitance Transistor Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) CTR Ratio
*1
Symbol VF Ct ICEO IF = 10 mA
Conditions
MIN.
TYP. 1.17 100
MAX. 1.4
Unit V pF
V = 0 V, f = 1.0 MHz VCE = 80 V, IF = 0 mA IF = 5 mA, VCE = 5 V
100
nA
Coupled
CTR
80
300
600
%
CTR1/ CTR2 VCE (sat)
IF = 5 mA, VCE = 5 V IF = 10 mA, IC = 2 mA
0.3
1.0
3.0
Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time
*2
0.3
V
RI-O CI-O tr tf
VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 10 V, IC = 2 mA, RL = 100
10
11
0.5 3 5
pF
s
*2
*1 CTR1 = IC1/IF1, CTR2 = IC2/IF2
IF1 IF2 IC1 VCE IC2
*2 Test circuit for switching time
Pulse Input PW = 100 s Duty Cycle = 1/10 VOUT RL = 100 IF VCC
50
4
PS2505-1,-2,-4,PS2505L-1,-2,-4
TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified)
DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE
Transistor Power Dissipation PC (mW)
TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE
150
150
Diode Power Dissipation PD (mW)
PS2505-1 PS2505L-1 100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 1.2 mW/C 1.5 mW/C
100 PS2505-2 PS2505L-2 PS2505-4 PS2505L-4 50
PS2505-1 PS2505L-1 1.5 mW/C
www..com 50
1.2 mW/C
0
25
50
75
100
125
150
0
25
50
75
100
125
150
Ambient Temperature TA (C)
Ambient Temperature TA (C)
FORWARD CURRENT vs. FORWARD VOLTAGE
100 50
Forward Current IF (mA)
FORWARD CURRENT vs. FORWARD VOLTAGE
80 60
Forward Current IF (mA)
TA = +100 C +60 C +25 C
40 20 0 -20 -40 -60
10 5 0 C -25 C -55 C
1 0.5
0.1 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5
-80
-1.5
-1.0
-0.5
0
0.5
1.0
1.5
Forward Voltage VF (V)
Forward Voltage VF (V)
COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE
Collector to Emitter Dark Current ICEO (nA)
COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE
40
50 mA 20 mA 10 mA
5 mA
10 000
Collector Current IC (mA)
1 000
VCE = 80 V 40 V 24 V 10 V 5V
10 5
2 mA
100
1 0.5
IF = 1 mA
10
1 - 50 -25 0 25 50 75 100
0.1 0
0.2
0.4
0.6
0.8
1.0
Ambient Temperature TA (C)
Collector Saturation Voltage VCE(sat) (V)
5
PS2505-1,-2,-4,PS2505L-1,-2,-4
COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE
Normalized Current Transfer Ratio CTR
NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE
70 60
Collector Current IC (mA)
50 40
50 mA
20
30 20 10 0 2
mA A m 10
,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 1.0 ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 0.8 ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,,,,,,,,,,,,,,,,,,, 0.6
1.2 0.4 0.2 0 Normalized to 1.0 at TA = 25 C, IF = 5 mA, VCE = 5 V -50 -25 0 25 50 75 100
IF = 5 mA
www..com
4
6
8
10
Collector to Emitter Voltage VCE (V)
Ambient Temperature TA (C)
CURRENT TRANSFER RATIO vs. FORWARD CURRENT
450
Current Transfer Ratio CTR (%)
SWITCHING TIME vs. LOAD RESISTANCE
1 000 IF = 5 mA, VCC = 5 V, CTR = 290 %
Switching Time t ( s)
tf
400 350 300 250 200 150 100 50 0 0.05 0.1 0.5 1 5 10 50
100
ts
10
tr 1 100 td 500 1 k 5 k 10 k 50 k 100 k
Forward Current IF (mA)
Load Resistance RL ()
SWITCHING TIME vs. LOAD RESISTANCE
50 IC = 2 mA, VCC = 10 V, CTR = 290 %
Switching Time t ( s)
FREQUENCY RESPONSE
IF = 5 mA, VCE = 5 V
tf tr
Normalized Gain GV
0 -5 -10 -15 RL = 1 k -20
10 td ts 1
100
0.1 10
300 50 100 500 1 k 5 k 10 k 0.5 1 2 5 10 20 50 100 200 500
Load Resistance RL ()
Frequency f (kHz)
6
PS2505-1,-2,-4,PS2505L-1,-2,-4
LONG TERM CTR DEGRADATION
1.2 IF = 5 mA (TYP.) 1.0
CTR (Relative Value)
0.8 TA = 25 C 0.6 0.4 0.2 TA = 60 C
www..com
0 102 103 Time (Hr) 104 105
Remark The graphs indicate nominal characteristics.
7
PS2505-1,-2,-4,PS2505L-1,-2,-4
TAPING SPECIFICATIONS (in millimeters)
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.550.1
4.30.2
7.50.1
16.00.3
www..com
1.550.1 8.00.1
0.3
5.60.1
Tape Direction
PS2505L-1-E3 PS2505L-1-F3 PS2505L-1-E4 PS2505L-1-F4
Outline and Dimensions (Reel)
2.00.5 13.00.5
PS2505L-1-E3, E4: 250 PS2505L-1-F3, F4: 330
R 1.0
21.00.8
80.05.0
10.30.1
16.4 +2.0 -0.0
Packing: PS2505L-1-E3, E4 1 000 pcs/reel PS2505L-1-F3, F4 2 000 pcs/reel
8
PS2505-1,-2,-4,PS2505L-1,-2,-4
Outline and Dimensions (Tape)
2.00.1 4.00.1
1.750.1
1.550.1
4.30.2
16.00.3 10.30.1
www..com
7.50.1
1.550.1 12.00.1
10.40.1
0.3
Tape Direction
PS2505L-2-E3
PS2505L-2-E4
Outline and Dimensions (Reel)
2.00.5 13.00.5
R 1.0
21.00.8
80.05.0
330
16.4 +2.0 -0.0
Packing: 1 000 pcs/reel
9
PS2505-1,-2,-4,PS2505L-1,-2,-4
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux 235 C (package surface temperature) 30 seconds or less Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Recommended Temperature Profile of Infrared Reflow
www..com
Package Surface Temperature T (C)
(heating) to 10 s 235 C (peak temperature) 210 C to 30 s 120 to 160 C 60 to 90 s (preheating)
Time (s)
Caution Avoid removing the residual flux with chlorine-based cleaning solvent after a reflow process.
Peak temperature 235 C or below
(2) Dip soldering * Temperature * Time * Number of times * Flux 260 C or below (molten solder temperature) 10 seconds or less One Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
10
PS2505-1,-2,-4,PS2505L-1,-2,-4
[MEMO]
www..com
11
PS2505-1,-2,-4,PS2505L-1,-2,-4
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested. Please do not under any circumstances break the hermetic seal.
www..com
NEPOC is a trademark of NEC Corporation.
No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product.
M4 96. 5

▲Up To Search▲

Price & Availability of 2505

	To Download 2505 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .